• three layers line - one main extruder (twin screw) and two coextruders;
• annual output approx. 18 000 t.;
• working width 6 600 mm;
• two side corona;
• maximum speed 320 m/min;
• the production range regarding thickness of the BOPP line 6.6 m is 10-60 microns;
• maximum diameter of the jumbo roll- 1 000 mm.
• dosing - gravimetric;

Advantiges of the new 6.6 m line:

Equipment is last generation not only from Brueckner but also from subsupplyers Siemens, Berstorff, Kiefel and etc.
- two corona generators that allow to treat the film on both sides and after that to print on both sides or convert;
- direct drives on the rolls, without gear boxes and belts for more precise adjustment of the speed;
- twin screw extruder for bigger output, better homogenization and no influence from humidity;
- TDO "heat recovery system" for energy saving up to 40 %;
- linear motors for guiding system and winding - for high speed winding;